Features:

● The electronically controlled crawler chassis system is used to realize full-featured wireless remote control and realize man-machine separation. The functions of the chassis (forward, backward, left turn, right turn, upshift, downshift, throttle up and down) all use rockers. -Type wireless remote control operation, convenient, simple and reliable. The remote control adopts computer dual-power transmission to prevent failure of one side of the remote control and the receiver. The chassis can immediately stop working to ensure safe operation.

● Equipped with an intelligent feeding system. The feeding is driven by a hydraulic motor, which detects the feeding speed in real time to ensure the smooth operation of the engine and protect the engine. The hydraulic system is electrically controlled.

● The blade adopts a double-sided blade. In addition to the blade installed, an additional set of blades is added to facilitate the replacement of grinding and prolong the use time of the blade.

● Equipped with LCD screen, can display fault code, working hours, oil temperature, oil pressure, can display the oil level, can remind to refuel when the oil level is insufficient, can remind all daily maintenance on time (such as changing the engine oil, filling grease) , Blade bolt inspection, blade inspection).

● The discharge tube can be adjusted 360 degrees, and the discharge outlet baffle is cleverly designed to control the range flexibly;

● Emergency stop protection rods are designed around the feed trough, and additional emergency stop buttons on both sides of the feed trough are provided to fully ensure the safety of the operator;

Scope of application:

This machine can slice and shred the dead trunks and branches of roads, landscaping pruned branches and pine wood nematodes, and can quickly and effectively turn organic waste into organic matter in an ideal state. Using Guangyi Branch Slicer, green waste can be easily converted into useful mulch and compost. There are also models available for crushing 8cm, 16cm and 30cm.

parameter:

Model: GYFS-200

Power: 3TNV88-BDLDW three-cylinder water-cooled Yanmar diesel engine

Supporting power: 26.9kW/3000rpm

Transmission mode: manual belt tightening

Feed throat size (length × width): 200×200mm

Feed roller diameter: 253mm

Knife roller (disk) diameter: 690mm

Spindle speed: 1580r/min

Cutting blade: 4 moving blades

Maximum cutting diameter: 200mm

Crushed maximum particle width: 10mm

Feed slot size (length × width × height): 1030×725×550mm

Dimensions (L×W×H): 2600×1680×2330mm